Triad Lubrication

Revealing New
Ideas for Equipment
Maintenance

Hydra Maxx: Hydraulic System Treatment

1. Dramatically reduces friction and metal to metal contact in the pump by forming a unique lubricating film.

 
2. Dramatically enhances an oil's ability to fight rust and corrosion formation.
3. Lowers the temperature at which typical hydraulic oils will flow by up to 10oC and reduces the risk of cold start-up wear.
4. Friction reduction dramatically lowers operating temperatures, adding life to pumps,
seals, hoses, and oil.
5. Replenishes Depleted Additives
 6. Demonstrates an incredible lubricating film strength capable of withstanding loads of upto 1.4 GPa (200,000 psi)

General Description:

HYDRA MAXX is specially designed for use in hydraulic systems, where piston, gear or vane pumps are used to circulate oil and transmit power. HYDRA MAXX is the first hydraulic oil treatment specifically designed to maintain maximum operating efficiency of your hydraulic system. This unique hydraulic system treatment from Power Up Lubricants works with your existing oil to provide long term wear and corrosion protection for metal components and extend seal and hose life.

At low application rates, HYDRA MAXX provides a wear reducing, protective film in the pump and valves which helps to reduce operating temperatures and extend equipment life. HYDRA MAXX improves the corrosion inhibiting properties and the low temperature flow properties of most hydraulic oils, providing longer term protection in the most demanding applications. Lower overall system temperature improves efficiency and extends the life of seals and hoses.

Primary Benefits of HYDRA MAXX:

The primary benefit of HYDRA MAXX is friction reduction at the boundary lubrication regime (metal to metal contact).  This includes the pump, cylinder rod and control valve areas in the hydraulic system. the reduction in friction lowers operating temperatures and improves component performance, efficiency and longevity.

Secondary Benefits of HYDRA MAXX:

  • Supplements anti-rust and corrosion protection.
  • Improves low temperature fluidity.
  • Improves an oil's ability to demulsify (separate) water from circulation.
  • Emulsifies trace water, maintaining a protective oil film without rupturing.
  • Improves the oil's ability to clean and disperse contaminants.
  • Improves filtration efficiency by reducing the generation of large wear particles.

Product Application and Availability:

HYDRA MAXX is recommended in all hydraulic circulating systems at a 3% ratio for ambient temperatures above 0oC (32oF) and a 5% ratio in operating conditions where the temperature may drop below 0oC (32oF). HYDRA MAXX is recommended for use with mineral oils and polyaphaolefin and diester based synthetic fluids. HYDRA MAXX is not recommended for use with water based fluids, phosphate esters or polyglycol fluids.

HYDRA MAXX is available in 1 litre bottles, 5 litre jugs, 10 litre jugs, 20 litre pails and 205 litre drums.

Customer Comments:

"After treating the hydraulic system in my Case 2090 with 5% Hydra Maxx, I noticed the power shift was much smoother and on cold winter days the system was ready for operation in 5 to 10 minutes compared to 20 to 30 minutes warm up.  Hydra Maxx has been the best product we have found for our hydraulic system."
-Curtis Bundus, Bulyea, Saskatchewan

 
Copyright © 2006 Triad Lubrication LLC
and Roswell Web Services, All Rights Reserved
Webmaster